Z AXIS for CNC PLASMA,OXY OR SMALL ROUTER

5 inchs travel
4" WIDE
 
FOR NEMA 23 MOTOR
*****Use 75oz/in - 450oz/in motor with 1/4 shaft*****
for 3/8 shaft, ask for the right coupling
---------------------------------------------------------------


machined from 3/8 plate 6061T6 alu.


 3/8-16 SCREW WITH ACETAL NUT

DOUBLE SS BEARING ON ONE END

ACETAL BEARING

LOW PROFILE,  ONLY 2.625"
VERY COMPACT UNIT with FLAT BACK

WEIGHT +/- 4.4LBS WITHOUT motor

FRONT PLATE WITH 6X 5/32 MOUNTING HOLES
(they are not in the actual picture)


PLAIN BACK PLATE
(we can make mounting hole for you,  ask)

FRONT PLATE IS 4" X 5"
BACK PLATE IS 4" X 10"



 
included: 
-z axis unit
-1/4 rigid coupling,   other size available, it's free!!

-4x M4 screws

 

 

OPTIONS:

Stainless version with stainless smooth rods,  stainless lead-screw and all stainless hardware.  Good for cnc plasma with water table.

Write a review

Note: HTML is not translated!
    Bad           Good

Z axis nema 23

  • Product Code: Standard
  • Availability: 1
  • $155.00


Available Options


Related Products

2pcs 6x12x4mm flanged bearing MF126ZZ

2pcs 6x12x4mm flanged bearing MF126ZZ

    You get 2pcs,  MF126ZZ bearing double shielded   6mm ID x 12mm OD x 4mm     Replacemen..

$5.00

Nema 23 motor 19.4kg-cm 269oz-in

Nema 23 motor 19.4kg-cm 269oz-in

  Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 1.9Nm(269oz.in) Rated Curr..

$45.00 $49.00

Acetal nut 3/8-16

Acetal nut 3/8-16

Acetal nut Perfect for Z axis   3/8-16 for threaded rod 3/8 pitch 16   1"OD x .830"   Spar..

$5.00

Acetal bearing 1/2" ID x 3/4" OD

Acetal bearing 1/2" ID x 3/4" OD

ACETAL BEARING FOR 1/2SS SMOOTH ROD   .5" ID X .75" OD X .49"   WITH FLANGE   *REPLACEMENT ..

$4.00

Z AXIS NEMA 23 WIDE

Z AXIS NEMA 23 WIDE

Z AXIS for CNC PLASMA,OXY OR SMALL ROUTER5 inchs travel 4" WIDE BACK PLATE   6" WIDE FRONT PLAT..

$160.00

Plasma/oxy Torch holder 1"3/8 Body CNC

Plasma/oxy Torch holder 1"3/8 Body CNC

PLASMA/OXY  TORCH HOLDERFOR MACHINE TORCH 1"3/8 BODYmade from 6061T6 aluminum included:  -holder ..

$55.00

Router holder for 69-71mm body BOSH Colt-DEWALT 611

Router holder for 69-71mm body BOSH Colt-DEWALT 611

ROUTER HOLDERideal for bosh colt palm router or DEWALT 611FOR 69-71mm bodymade from 6061T6 alumin..

$79.00

Router holder for 3" 1/2 body

Router holder for 3" 1/2 body

ROUTER HOLDERFOR 3.5" bodymade from 6061T6 aluminum included:  -holder for 3.5" body router-5 scr..

$84.00