Z AXIS UPGRADE

NEW-Carve ultimate upgrade GRBL settings

NEW-Carve ultimate upgrade Demon

New-Carve ultimate upgrade: If you use your original steppers you need to remove the pressed pulley

and cut the shaft lenght +-1/8".  We recommend using our steppers.  The steppers from Inventables are not standard.

**** Important information about using Easel with our Ultimate kit ****

Enter all our recommended settings for your kit size.

*Before trying to home and jog, disable the homing and soft limit setting,
Soft limit: $20=0 to disable and $20=1 to enable.
Homing: $22=0 to disable and $22=1 to enable.

**Be sure your home switches are wired for NO, pins 1 and 3.

Once you are sure the machine jogs in the right direction, enable the homing and soft limit.

***Be aware because Easel likes to return to the original GRBL settings!!
***Don't use the machine inspector because it will return to the original grbl!
Most use UGS or PicSender, they are more reliable senders!

Hope this helps!
cnc4newbie.com