NEW-Carve ultimate upgrade GRBL settings

NEW-Carve ultimate upgrade Demon


New-Carve ultimate upgrade: If you use your original steppers you need to remove the pressed pulley

and cut the shaft lenght +-1/8".  We recommend using our steppers.  The steppers from Inventables are not standard.


**** Important information about using Easel with our Ultimate kit ****

Enter all our recommended settings for your kit size.

*Before trying to home and jog, disable the homing and soft limit setting,
Soft limit: $20=0 to disable and $20=1 to enable.
Homing: $22=0 to disable and $22=1 to enable.

**Be sure your home switches are wired for NO, pins 1 and 3.

Once you are sure the machine jogs in the right direction, enable the homing and soft limit.

***Be aware because Easel likes to return to the original GRBL settings!!
***Don't use the machine inspector because it will return to the original grbl!
Most use UGS or PicSender, they are more reliable senders!

Hope this helps!

There are no products to list in this category.